Roll Assy Feed; Solenoid Feed Msi - Brother HL-4000CN Service Manual

2.2.11

Roll ASSY feed

1) Release the hook securing the roll core MSI: right to the shaft MSI on the chute
ASSY out and push down the plate bottom MSI slightly to release the nip with the roll
ASSY feed.
2) Slide the roll ASSY feed to the right on the shaft MSI and lift out the roll ASSY feed
forwards.
2.2.12

Solenoid feed MSI

1) Release the hook of the spring sol from the convex portion on the stopper sol from
the left side of the chute ASSY out.
2) Remove the connector of the solenoid feed MSI from the chute ASSY out.
3) Remove 1 screw securing the solenoid feed MSI to the chute ASSY out.
4) Remove the solenoid feed MSI from the chute ASSY out.
Screw, tapping M3x8
Plate bottom MSI
Fig.4-36
Stopper sol
Spring sol
Solenoid feed MSI
Fig.4-37
IV-23
Roll core MSI: right
Roll ASSY feed