Disassembly Procedure; Cover Of The Printer - Brother HL-4000CN Service Manual

2.

DISASSEMBLY PROCEDURE

2.1

Cover of the Printer

2.1.1 Cover ASSY front head
1) Release latch B of the printer and open the front cover.
Note:
Do not separate the front cover and cover ASSY front head too far in the following
process.
2) Release the 4 hooks securing the cover ASSY front head to the front cover.
3) Separate the cover ASSY front head a little from the front cover.
4) Remove the connector from the console panel.
5) Remove the connector from the fan assembly.
6) Remove the cover ASSY front head from the front cover.
Cover ASSY front head
Fig.4-6
IV-6