Inserting The Rd Roll - Brother TD-2120N TD-2130N TD-2120NW User Manual

Inserting the RD Roll

Use genuine Brother roll media.
Genuine Brother fanfold media is not
available at this time.
a
Press and hold the
turn the printer off.
Press the cover release lever (1) on
either side and lift up to open the RD
Roll compartment top cover.
b
Open the media guides by lifting up the
media guide adjustment lever (1) and
pulling the media guides outwards.
NOTE
The media guides are shipped fully open
from the factory.
2
(Power) button to
1
1
c
Insert an RD Roll into the RD Roll
compartment, and then close the RD
Roll compartment top cover.
 For an RD Roll
1
Insert the RD Roll so that the
labels feed with the side to be
printed on facing up (1), as
shown.
1
Use RD Rolls with an outer roll

dimension of 5" (127 mm) or less.
Use RD Rolls designed for TD
series printers. Regardless of the
size, some RD Rolls may not be
usable.
 Insert the RD Roll facing the correct
direction. If the RD Roll is not
inserted correctly, the printer will not
print on the correct side of the paper
or label.
 When using media with the labels
rolled up on the inside, insert the roll
in the opposite direction of that
shown in sub-step 1 of step c so
that the print side of the labels will
face up.
Printing
2
15