Resetting The Switch To The Factory Default Settings; Finding The Switch Serial Number - Cisco IE-3010-16S-8PC Hardware Installation Manual

Chapter 4 Troubleshooting

Resetting the Switch to the Factory Default Settings

Follow these steps to return your switch to the factory default settings.
Resetting the switch deletes the configuration and reboots the switch.
Note
To reset the switch:
1.
2.
The switch displays the prompt to run the initial configuration dialog. See
the Switch with the CLI Setup Program."

Finding the Switch Serial Number

If you contact Cisco Technical Assistance, you need to know the switch serial number.
Figure 4-2
command to see the switch serial number.
Figure 4-1
78-19581-01
At the switch prompt, enter enable, and press Return or Enter.
At the Privileged EXEC prompt,
show the serial number locations. You can also use the show version privileged EXEC
Serial Number Location for Cisco IE-3010-24TC and IE-3010-16S-8PC Switches
SN: XXXNNNNXXXX
Resetting the Switch to the Factory Default Settings
#, enter setup and press Return or Enter.
switch
Cisco IE 3010 Switch Hardware Installation Guide
Appendix C, "Configuring
Figure 4-1 and
4-5