Table of Contents
Advertisement
Preface
This guide describes the hardware features of the Cisco Industrial Ethernet (IE) 3010 switch. It describes
the physical and performance characteristics of the switch, explains how to install it, and provides
troubleshooting information.
This guide does not describe system messages that you might receive or how to configure your switch.
See the switch software configuration guide, the switch command reference, and the switch system
message guide on Cisco.com:
http://www.cisco.com/go/IE3010_docs
Means reader take note. Notes contain helpful suggestions or references to materials not contained in
Note
this manual.
Means reader be careful. In this situation, you might do something that could result in equipment
Caution
damage or loss of data.
IMPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this
device. Statement 1071
SAVE THESE INSTRUCTIONS
Cisco IE 3010 Switch Hardware Installation Guide
vii
78-19581-01
Advertisement
Table of Contents
