Table of Contents
Advertisement
Management Options
Power Supply Features
The switch has two slots for power-supply modules:
•
•
The switch supports these power-supply module combinations:
•
•
•
•
•
For information on installing the power-supply modules, see
See
Management Options
•
•
Network Configurations
See the switch software configuration guide on Cisco.com for an explanation of network configuration
concepts. The software configuration guide also provides network configuration examples for creating
dedicated network segments that are interconnected through Ethernet connections.
Cisco IE 3010 Switch Hardware Installation Guide
1-14
PWR-RGD-LOW-DC/IA: low-voltage DC (for voltage information, see
PWR-RGD-AC-DC/IA: high-voltage AC or DC (for voltage information, see
Single low-voltage DC
Single high-voltage AC or DC
Two high-voltage AC or DC
Two low-voltage DC
One high-voltage AC or DC and one low-voltage DC
Table 1-4
for information on the power supply LEDs.
Cisco IOS CLI
You can configure and monitor the switch from the CLI. Connect your management station to the
switch console port or use Telnet from a remote management station. See the switch command
reference on Cisco.com for information.
SNMP network management
You can manage switches from a Simple Network Management Protocol (SNMP)-compatible
management station that is running platforms such as HP OpenView or SunNet Manager. The switch
supports a comprehensive set of Management Information Base (MIB) extensions and four Remote
Monitoring (RMON) groups. See the switch software configuration guide on Cisco.com and the
documentation that came with your SNMP application for information.
Chapter 1
Table
A-6)
Table
Chapter 3, "Power Supply Installation."
Product Overview
A-5)
78-19581-01
Advertisement
Table of Contents
