System Programming
Printing Reports
Use the following procedure to print system reports using SPM at the PC. The
SPM Print Opts must be set to PC Port. See "Print Options" for details about
setting the printer output port.
1 At the System Programming menu, press (PgUp) to display the second page
o f t h e m e n u .
System Programming: >
Make a selection
Labeling
(F1)
Data
(F2)
Print
(F3)
Cntr-Prg
(F4)
Exit
(F5)
2 Press (F3) to select Print.
Please enter file name
to store print
(default is print .ams)
Press Esc to Abort.
3 Use one of the methods shown after this procedure to print the report(s).
4 Observe the print status screen.
Print in Progress . . .
Exit
(F5)
You can press (F5) to interrupt printing and return to the SPM Main Menu.
System Programming and Maintenance (SPM) 61
LPT1:
GOTO FLOPPY
MAKE NEW FILE
PRINT.AMS