AT&T MERLIN LEGEND Release 3.0 System Programming And Maintenance Manual page 58

Using SPM
After you press (Enter
GOTO HARD DISK and a directory listing from the root directory of the floppy
disk smears. Go to Step 4.
Please select file name
to convert from,
then press Enter
Press ESC to abort.
4 Use the arroe keys to highlight the name of the backup file to be
converted and press (Enter
If the backup file you select is a 3.0 backup, it can not be converted
and the following message appears:
File has already been converted.
Press Enter to continue.
Press (Enter
convert procedure.
If the backup file you select can be converted, go to Step 6.
5 Observe the updated file selection screen and press (Enter
Please select file name
to convert from,
then press Enter
FILENAME.XXX
N:
Press ESC to abort.
40 System Programming and Maintenance (SPM)
↵ ),
the GOTO FLOPPY statement shown above changes to
GOTO HARD DISK
FILENAME.XXX
FILENAME.YYY
FILENAME.XXX and
FILENAME. YYY from the root
directory of the disk in
Drive A.
↵
) .
↵
) to select another filename, or press (Esc) to abort the
FILENAME.XXX = the backup filename
N = drive
↵
) .
selected in Step 4