AT&T MERLIN LEGEND Release 3.0 System Programming And Maintenance Manual page 59

Using SPM
6 If converting from Release 1.0 or 1.1, select the CONVERT TO release. To
convert from Release 1.2, 2.0 or 2.1 go to Step 7.
The screen below appears when converting from Release 1.0 or 1.1. Release
1.2, 2.0 and 2.1 can only be converted to Release 3.0.
Please enter your
CONVERT TO release
and press ENTER.
1.2
2.0
3.0
Enter number: x.x
7 Follow the instruction for a floppy or a hard disk.
If the CONVERT TO file will be saved to a floppy kisk, go to Step 8.
If the CONVERT TO file will be saved to the hard disk, go to Step 9.
8 Use the srrow keys to highlight GOTO FLOPPY and press (Enter
Please select file name
to convert to, or select
NEW FILE to create a new
file on selected drive.
Enter Filename:
After you press (Enter
GOTO HARD DISK
Drive A appears. Continue with Step
Please select file name
to convert to, or select
NEW FILE to create a new
file m selected drive.
Enter Filename:
Press ESC to abort.
2.1
↵
) the
GOTO FLOPPY
and the directory listing from the root directory of the disk in
System Programming and Maintenance (SPM) 41
All characters must be entered as they
appear on the screen, including the
decimal point.
GOTO FLOPPY
MAKE NEW FILE
FILENAME.XXX
FILENAME.YYY
statement shown above changes to
9.
GOTO HARD DISK
MAKE NEW FILE
FlLENAME.XXX
FILENAME.YYY
↵
)