With A Local Or Remote Modem Connection; Considerations - AT&T MERLIN LEGEND Release 3.0 System Programming And Maintenance Manual

Accessing SPM

With a Local or Remote Modem Connection

The method you use to access SPM by modem depends on whether you are
programming on site (locally) or from a remote location.
If you are on site, the modem must be connected to an 012 module on
the control unit. To establish a connection to the control unit's internal
modem, dial *10.
If you are at a remote location, do one of the following:
Place a call to the system on a Remote Access line, enter the
barrier code
(*10).
Place a voice call to the system using the line to which the modem
is connected and ask the operator to transfer you to the modem (by
pressing Transfer, dialing *10, then hanging up the telephone).
When you hear the modem

Considerations

Review the following items before you
procedure.
Set the Programming Language
you prefer to program in a language other than the current SPM language
If
setting, see "Language."
required), and dial the code for the internal modem
(if
answer tone, switch to data mode.
begin the modem connection
System Programming and Maintenance (SPM)
17