AT&T MERLIN LEGEND Release 3.0 System Programming And Maintenance Manual page 43

Using SPM
Table 2- Continued
Console
PC Key
(Ctrl) + (F5) n/a
n/a
(Ctrl) + (F8)
n/a
(Ctrl) + (F9)
↵
Enter
(Enter )
Backspace
(Bksp)
Delete
(Del)
n/a
( ^ ) ( )
v
(< ) ( >)
SPM Function
Reset. Reset the communications port. For
example, if the information on the screen is
garbled, try exiting from and then recentering
the screen. If the screen remains garbled, use
(Ctrl) (F5)
+ to clear the screen and return to the
SPM Welcome screen. Note that using
(F5)
drops the modem connection.
Browse. View print reports saved with Print
opts.
Escape to shell. To use this key sequence, you
must set DEBUG=1 in the SPM configuration file
ams.cfg. You can then use this key sequence to
UNIX System) commands. To
execute DOS (or
return to SPM, type exit.
↵
The (Enter ) key on your PC
(F10)
instead of when
in the console simulation window.
(Bksp)
The key on your PC can be used instead of
(F9) (Backspace)
the console simulation window.
(Del)
The key on your PC can be used instead of
(F8) (Delete)
when it appears as a choice in the
console simulation window.
The up, down, left, and right arrow keys can be
used to highlight selections in a menu and to
select the 20 line buttons below the console
simulation window.
System Programming and Maintenance (SPM) 25
(Ctrl)
can be used
Enter appears as a choice
when it appears as a choice in
+