Boards - AT&T MERLIN LEGEND Release 3.0 System Programming And Maintenance Manual

Using SPM
When the backup is complete, you see the screen shown in Step 9.
8 To abort the backup press (Esc) ro reurtn to the SPM Main Menu.
Backup aborted
Please press Enter
to see the Main Menu:
9 When the backup is complete, press (Enter
M e n u .
Backup successful.
Please press Enter
to see the Main Menu
Received xxx Blocks.

Boards

The Boards option allows qualified service personnel to add a board to the
next available slot. The system must be idle to use this option. This option is
not available from the system programming console.
The Boards option is also available in surrogate mode. In surrogate mode,
you can assign trunk and extension modules (boards) to slots, even though
the boards have not actually been installed. This type of board is referred to
as a "phantom" or "null" board.
You cannot use the Boards option to change an actual board type. All boards
assigned with the Boards option, including phantom boards, are cleared
(unassigned) if you perform a board renumber (System> Board Renum).
32 System Programming and Maintenance (SPM)
↵
) to return to the SPM Main
xxx = total number of blocks received