Table of Contents
Advertisement
2.6.4 IrDA Connector
IRRX
N. C.
Ground
VCC
1
Connect your IrDA cable to connector J5 on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector according
to their pin functions.
BIOS Setting
Configure IrDA in the Integrated Peripherals submenu of the
BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating
system to use the IrDA function. Refer to your operating system's
manual or documentation for more information.
IRTX
"
5
Hardware Installation
2
41
Advertisement
Table of Contents
