Programming
ASSIGNING CUSTOM FEATURES TO BUTTONS
A number of custom features can be assigned to any spare but-
tons on your voice terminal using the following simple program-
ming procedure. Later, you can change a feature using the same
procedure.
Label the button(s) you want to program.
Slide the T/P (Test/Programming) switch toward you to the
P (programming) position. The phone will ring every five
seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button to be programmed.
Dial the feature's programming code (see chart on next page).
Enter additional numbers or special characters (if required).
Program other buttons if desired.
Return the T/P switch to center position.
T
+
+
P
T
+
P
16