Freezing The Screen - Fluke 190-102 User Manual

ScopeMeter® Test Tool 190 Series II
Users Manual
5 Open the
ENTER
6 Select the Peak-Peak
measurement.
ENTER
Figure 8 shows an example of the screen with two
readings. The character size will be reduced when more
than two readings are on.
Figure 8. Hz and V peak-peak as Scope Readings
20
menu.
PEAK

Freezing the Screen

You can freeze the screen (all readings and waveforms) at
any time.
1
Freeze the screen.
HOLD
at the right of the reading area.
RUN
The key illumination is on.
2 Resume your measurement. The
HOLD
key illumination is off.
RUN
appears
HOLD