Freezing The Screen; Holding A Stable Reading - Fluke 123 User Manual

Fluke 123/124
Users Manual

Freezing the Screen

You can freeze the screen (all readings and waveforms) at
any time.
Freeze the screen. HOLD
appears at the bottom of the
reading area.
Resume your measurement.
16

Holding a Stable Reading

®
The Touch Hold function captures a stable main (large)
reading on the display. When a new stable reading is
detected, the test tool beeps and displays the new
reading.
Use the following procedure for the Touch Hold function:
Open the INPUT A menu.
TOUCH HOLD OFF appears on
bottom of the screen.
Measure the signal.
) Wait until an audible beep: now
)
BEEP
)
you have a stable display.
The screen continues to update
with valid readings (and beeps) as
longs as you maintain the
measurement connections.
Because no special keys accompany the Touch Hold
function, you can use this function for hands-free
measurements.
Return to normal measurement.