Scope And Meter Mode - Fluke 123B User Manual

Scope and Meter Mode

The Scope and Meter mode is the default operation
mode. When in another mode, such as Recorder, Power
Harmonics, or BusHealth, push  to return to Scope
and Meter operation. In Scope and Meter mode, the
button bar looks like this:
To go to the Move and Zoom button bar, push  until
you have left any open button bar or menu.
The yellow text on the button bar indicates the status.
Push the button to change the status.
To prevent possible electrical shock, fire, or
personal injury:
•
•
sm_bar_eng.eps
•
•
mz_bar_eng.eps
•
Industrial ScopeMeter®
Scope and Meter Mode
XW Warning
Do not touch exposed metal on banana
plugs. They can have voltages that could
cause death.
Disconnect power and discharge all
high-voltage capacitors before you
measure resistance, continuity,
capacitance, or a diode junction.
Do not put metal objects into
connectors.
Do not use exposed metal BNC or
banana plug connectors.
Do not use the HOLD function to
measure unknown potentials. When
HOLD is turned on, the display does not
change when a different potential is
measured.
13