Table of Contents
Advertisement
Use the Meter
Turn On/Off the Meter
Use the Power button
•
Power on: Push and hold
•
Power off: Briefly push
After powering on and a short self-test, the Meter will automatically display the current temperature
and RH measurement.
The Meter will automatically shut down if there is no activity for 20 minutes.
Disable the Auto Power-off Function
To disable the auto power-off function, turn on the product, then simultaneously push and hold
and
for 5 seconds until the battery level icon flashes, then release the buttons.
The auto-off function is enabled the next time you turn on the Product.
View the Current Measurements
The Meter measures the current temperature and humidity immediately after power on, and the
default screen is shown below:
During measurement, users can select and view different current measurements via buttons on the
front panel.
When moving from one temperature/humidity extreme to another, allow time for
the Meter to stabilize.
on the front panel to turn the Meter on and off.
for 2 seconds, release the button when the screen lights up.
to turn the Meter off.
Note
Figure 4. Default Measurement Screen
Caution
Temperature Humidity Meter
Use the Meter
11
Advertisement
Table of Contents
