Table of Contents
Advertisement
PDU power cords(C13-C14)
All PowerConnect devices ship with US-compatible PDU power cords(C13- C14) unless otherwise
specified at the time of order. United Kingdom- and European-compatible power cords are also
available.
For PDU power cords (C13-C14) specifications, refer to
Power supply specifications
This section contains the following information for the power supplies that ship with PowerConnect
B-Series TI24X devices.
•
•
•
•
•
•
•
•
•
Overview
Each PowerConnect B-Series TI24X switch comes with one alternating-current (AC) power supplies.
The following power supplies may be installed in your PowerConnect B-Series TI24X switch:
•
The power supplies can be swapped in or out of the device while the device is running, without
opening the device. You can remove one of the power supplies without interrupting operation. The
remaining power supply provides enough power for all the ports.
CAUTION
Remove the PDU power cords (C13-C14) from a power supply before you install it in or remove it
from the device. Otherwise, the power supply or the device could be damaged. The device can be
running while a power supply is being installed or removed, but the power supply itself should not
be connected to a power source.
All power supplies are auto-sensing and auto-switching.
Key features
Refer to
supplies.
Dell PowerConnect B-Series TI24X Hardware Installation Guide
53-1002265-01
"Overview"
"Key features"
"Physical dimensions and weight"
"Environmental considerations"
"Power supply consumption"
"Input connector and plug"
"Regulatory compliance"
"Safety warnings"
"Electrical specifications"
RPS-11 (8P26P) (AC power supply)
"Power supplies"
on page 6 for the key features of the PowerConnect B-Series TI24X power
Power supply specifications
"Input connector and plug"
A
on page 57.
55
Advertisement
Table of Contents
