Table of Contents
Advertisement
Boot Prom MAC: 0011.1122.2233
The power supplies are numbered from left to right. These numbers assume you are facing the
front of the device, not the rear.
If the display indicates "Installed (Failed)" for any of the slots, the power supply installed in that
particular slot has failed.
AC power supplies
Use the following procedures for AC power supplies in PowerConnect B-Series TI24X devices.
DANGER
Before beginning the installation, refer to the precautions in
You will need a #2 Phillips-head screwdriver to perform these procedures.
Figure 14
FIGURE 14
Removing an AC power supply
Follow the steps to remove an AC power supply.
1. Unplug the PDU power cords (C13-C14) from the power source.
2. Disconnect the PDU power cords (C13-C14) from the power supply.
Dell PowerConnect B-Series TI24X Hardware Installation Guide
53-1002265-01
shows a front view of the AC power supply.
AC power supply
Replacing a power supply
"Power precautions"
on page 12.
5
41
Advertisement
Table of Contents
