Table of Contents
Advertisement
5
Replacing a power supply
3. Push inward until the supply is completely in the slot, so that the connectors on the back of the
DANGER
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the power connector is on the left and the fan vent is on the
right.
FIGURE 19
44
supply fully engage with the pins on the power backplane.
Installing the power supply
Dell PowerConnect B-Series TI24X Hardware Installation Guide
53-1002265-01
Advertisement
Table of Contents
