Dell PowerConnect B-TI24x Hardware Installation Manual page 53

Installing an AC power supply
NOTE
If the empty power supply bay has a cover plate, remove it as shown below before continuing.
FIGURE 17
FIGURE 18
1. Remove the new power supply from its packaging.
2. Hold the handle on the front panel of the power supply with one hand and ensure that the
Dell PowerConnect B-Series TI24X Hardware Installation Guide
53-1002265-01
Releasing the cover plate
Removing the cover plate
alignment pin on the right side of the power supply is correctly aligned. With the other hand,
support the underside of the power supply, and insert the power supply into the empty power
supply slot.
Replacing a power supply
5
43