Network Interfaces - Dell PowerConnect B-TI24x Hardware Installation Manual

Powerconnect b series
Table of Contents

Advertisement

Management port
The Management port provides connectivity to your existing management network through
10/100/1000 copper ports that uses auto-sensing and auto-negotiating to determine the speed
(10 Mbps, 100 Mbps, or 1000 Mbps) and mode (full-duplex or half-duplex) of the port at the other
end of the link, and adjusts port speed accordingly. The Management port on the PowerConnect
B-Series TI24X supports RJ-45 copper connectors, auto MDI or MDIX detection, and has an RJ-45
unshielded twisted pair (UTP) connector.
NOTE
This port interfaces with the CPU only and not the data plane.

Network interfaces

Table 1
network interface specifications, refer to
TABLE 1
Interface
1000Base-BX-D
1000Base-BX-U
1000Base-LHA
1000Base-LX
1000Base-SX
10GBase-LR
10GBase-SR
Viewing the media types installed in the ports
The show media command displays the types of media (copper or fiber) installed in the ports. The
following example is show media output.
Dell PowerConnect B-Series TI24X Hardware Installation Guide
53-1002265-01
describes the network interfaces supported on PowerConnect B-Series TI24X devices. For
Optics for Network Interfaces
PowerConnect# show media
Port 1: Type : 10G XG-SR(SFP+)
Vendor: Brocade Version: 1
Part# : PLRXPLSCS4371 Serial#: C833UQ06H
Port 2: Type : EMPTY
Port 3: Type : EMPTY
Port 4: Type : EMPTY
Port 5: Type : EMPTY
Port 6: Type : 10G XG-SR(SFP+)
Vendor: Brocade Version: 1
Part# : PLRXPLSCS4371 Serial#: C847UQ04C
Port 7: Type : 10G XG-SR(SFP+)
Vendor: Brocade Version: 1
Part# : PLRXPLSCS4371 Serial#: C847UQ04H
Port 8: Type : EMPTY
Port 9: Type : EMPTY
Port 10: Type : EMPTY
Port 11: Type : EMPTY
Port 12: Type : EMPTY
Table 12
on page 54.
Show Media Description
M-GBXD
M-GBXU
M-LHA
M-LX
M-SX
XG-LR
XG-SR
Hardware features
1
3

Advertisement

Table of Contents
loading

Table of Contents