Amanda @SOHO Version 3.xx Administrator's Manual page 21

Hide thumbs Also See for Amanda@SOHO Version 3.xx:
Table of Contents

Advertisement

Chapter 2: Installing Amanda
SOHO Dialcodes Installation Table (Continued)
Field Label
Which DTMF tone to listen to for
hangup detection:
Integration timeout
1, 2, 3, 4, 5, and 6
MWI: ON
: OFF
Pager
If your telephone switching system plays a specific DTMF tone when a caller hangs up
(to make hangup detection faster), enter that DTMF digit here.
This may be a sequence of DTMF digits rather than a single DTMF digit. The maximum
length is 10 characters. If your system does not support this feature, leave it blank.
Type a number of tenths of seconds. A value of 0 prevents integration. Any other value
is the amount of time that Amanda will wait for information from the telephone switch-
ing system. A suggested value for this timeout is 10 (which equals 1 second). In some
cases you may need a value of 15 or 20.
You can use a maximum of six integration patterns. To enter these patterns, see "Enter-
ing Integration Strings" on page 16.
Notification method that turn message waiting indicators (MWI) on. The method field
usually contains the following characters (called tokens):
0 1 2 3 4 5 6 7 8 9 * # A B C D
,
-
%E
For example, if Amanda is attached to a Toshiba DK-16, you use #63,%E.
Notification method that turns MWI off. The method field usually contains the follow-
ing characters (called tokens):
0 1 2 3 4 5 6 7 8 9 * # A B C D
,
-
%E
For example, if Amanda is attached to a Toshiba DK-16, you use #64,%E.
Notification method that calls a pager. The method field usually contains the following
characters (called tokens):
0 1 2 3 4 5 6 7 8 9 * # A B C D
,
-
%M
%N
%U
%V
For example, a typical pager notification record should be similar to the following
string: %V,,,%U*%M*%N.
Note:
When assigning a pager number, be sure to dial a 9* before the telephone
number to access an outside line. The * represents a 2-second pause.
7.
When you have finished press F10 to save and Esc to exit.
Amanda automatically reboots.
8.
Type Alt+X to end the connection.
The program asks you to confirm your decision to exit by typing Y.
The remote computer disconnects from Amanda.
Description
Amanda plays the corresponding tone.
Amanda pauses for two seconds
Amanda pauses for 0.5 seconds
Amanda replaces this with the user's mailbox ex-
tension
Amanda plays the corresponding tone.
Amanda pauses for two seconds
Amanda pauses for 0.5 seconds
Amanda replaces this with the user's mailbox ex-
tension
Amanda plays the corresponding tone.
Amanda pauses for two seconds
Amanda pauses for 0.5 seconds
Amanda replaces this with the
number of messages
Amanda replaces this with the
number of new messages
Amanda replaces this with the
user's mailbox number
Amanda replaces this with the pager number en-
tered by the user as he creates a pager notification
record. See Using Amanda@SOHO for details.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Soho 3

Table of Contents