Altigen Call Detail Reporting Manual page 78

Search Results
3 = Call Redirect: call is redirected to another extension or trunk by the
AltiLinkPlus command "Redirect".
4 = Ring No Answer: call rang target but no agent answered.
5 = Busy: call tried to ring an agent but the agent extension was busy.
6 = Queue: call abandoned from the workgroup queue.
7 = Queue Overflow: call was forwarded by workgroup overflow
configuration.
8 = Connected: call connected with an agent, then disconnected.
9 = Conference: caller is conferenced with others, then disconnected.
10 = Conference Member: every member of a conference call will have a
record with this exit state.
11 = Hold: A calls B and is connected. B uses AltiView/AltiAgent to hold
this call. B drops, and now A is in "Hold" state. Then A drops. Call A
gets this exit state.
12 = Transfer: call is transferred by an agent who pressed flash to transfer
this call. A calls B and is connected. B presses flash, dials C, and is
connected to C. B drops. Call A with B gets this exit state.
13 = Transfer destination unavailable: A calls B. A presses flash and dials
C. C rings but no answer. A drops. Call A with C gets this exit state.
14 = Transfer Cancel: A calls B. B presses flash, calls C and is connected.
Then B presses flash to disconnect C and connect back with A. Call
B with C exits with "transfer cancel".
15 = Go to VM w/out leaving vm: A calls B. B is busy or ring no answer.
A goes into B's voice mail. A drops without leaving any voice mail.
16 = Go to VM with leaving vm: A goes into B's voice mail, leaves a voice
mail, and then drops.
17 = General VM: A presses ## to enter the voice mail system, inputs
password, then drops.
18 = VM Access: A presses ### to enter another extension's voice mail,
then drops.
19 = VM Notify: A receives a notification call, enters password, then
drops.
20 = Call Pick Up: A calls B. While B is ringing, C enters #29B to pick up
this call. Call A with B gets this exit state.
72 CDR Manual