Gas Burner Control; Safety Cautions In Regard To The Cooking Zones - Baumatic BT2355SS User Manual

Gas burner control

Cooking burners are controlled by the
relevant control knobs. Heating power is
indicated on the knobs by the large
flame symbol and the small flame
symbol.
Always turn the knob over the large
flame position towards the small flame
position and back. The operating position
is always between the two flame
symbols.
Safety cautions in regard to the
cooking zones
Never use cooking zones without dishes,
or for heating the ambience!
Keep the cooktop clean, since dirt and
stains have adversary effect on the
functionality of burners.
If you like your food to be crisp, first set
the burner to the maximum and continue
cooking at minimum power.
Always provide adequate quantity of
water when cooking in the pressure
cooker. Lack of water may cause
damage to the dish and to the cooker.
Cooktop burners are thermally
protected. If the burner flame is
accidentally extinguished (spilled
food, gust of wind) the gas supply is
automatically shut. There is no
possibility of gas escaping into the
room!
If the flame of thermally non-protected
cooking burners is accidentally
extinguished, the gas escapes into the
room!
Be very precise when placing the burner
crown cap upon the crown. Always keep
the crown nozzles clean and free.
Instructions for use, installation and connection
crown cap
thermal
coupling
(certain models
only)
ceratin models
only
burner crown
correct
position of
burner
components
9