Anti Tilt Bracket; Leveling The Appliance And Extra Support - Baumatic BT2355SS User Manual

Anti Tilt Bracket

28
Instructions for use, installation and connection
Leveling the appliance and extra
support
Your appliance is equipped with extra
support. The height of the cooker with
the support is 90 cm, and without support
it is 85 cm. Left and right side of the
support is equipped with two wheels to
facilitate relocation. In the front part, on
both sides there are two adjustable
screws, used to level the cooker and
adjust its upper edge in line with the
adjacent kitchen furniture.
Adjustable legs are accessible when the
drawer is pulled out. Adjust the position
of the cooker by turning the legs in one
direction or another. Adjustable legs will
be turned easier if the appliance is
somewhat lifted up and tilted.
Additional support may be removed by
unscrewing the four screws holding it to
the bottom of the cooker. In such case
relocate the adjustable screws from the
support and place them left and right at
the bottom front base of the cooker.
Level the cooker as described earlier.
Some cookers are equipped with four
adjusting screws (two in front and two at
the back), used for leveling the appliance
or adjusting its heights to match the
adjacent furniture.