Turning on the appliance and setting a vacuum-
packing cycle
Control panel
1) Control buttons
2) LED displays
o Press to select the preserving cycle. The cycle lasts
approximately three minutes. The vacuum inside the
sea
led bags, in best conditions, can reach 0.002 - 0.005 bar.
o Once the cycle has started, if the button is pressed again, the
appliance moves directly to soldering the bags.
o Press to select the cooking cycle. The cycle lasts
approximately four minutes. The vacuum inside the
s
ealed bags, in best conditions, can reach 0.002 – 0.005 bar.
o Once the cycle has started, if the button is pressed again, the
appliance moves directly to soldering the bags.
o Press this button to interrupt the cycle in progress.
o Press to select the short vacuum cycle for containers.
The cycle lasts approximately one minute. The vacuum
inside the container reaches around 0.3 bar.
o If pressed for five seconds, the long vacuum cycle for containers
is activated. The cycle lasts approximately three minutes. The
vacuum inside the containers, in best conditions, can reach
0.005 – 0.010 bar.
11