Ignition And Operation Of Burners - Baumatic BT2355SS User Manual

Ignition and operation of burners

Gas burners may be ignited by means of
electric ignition spark plug, fitted
adjacent to each burner (certain models
only).
Single handed ignition
(certain models only)
To ignite the burner, press the selected
burner button and turn it to the maximum
power position
ignition device ignites the gas.
If the ignition device is out of order, either
due to power failure or humid ignition
device, use a match or a lighter to ignite
the gas.
Ignition with both hands
(certain models only)
To ignite the burner, press the selected
burner button and turn it to the maximum
power position
device button. Electric spark from the
ignition device ignites the gas.
If the ignition device is out of order, either
due to power failure or humid ignition
device, use a match or a lighter to ignite
the gas.
Keep the button pressed for
approximately 10 seconds after ignition to
stabilize the flame.
If you failed to ignite the burner after 15
seconds, shut the burner off and wait for
at least one minute before the next
attempt.
After that you can set the burning power
between high and low position to suit
your cooking requirements.
Button positions between
not recommended. In these positions the
10
. Electric spark from the
. Now press the ignition
in
Instructions for use, installation and connection
flame is not stabilized and may be
extinguished.
If the flame goes out repeat the
procedure.
If the burner flame goes out (for whatever
reason), shut the burner off and wait for
at least one minute before next attempt.
Note: before igniting the burners (triple-
ring burner, double-ring burner, and Mini
Wok) cover them with appropriate
cookware.
To shut the burner off turn the button to
the right, to the OFF position
(CLOSED).
To facilitate positioning small dishes on
the burner grid, place the attached
support extension over the auxiliary
burner.
are
Gas faucet is closed
Maximum power position
Minimum power position