Instructions For Installation And Connection27; Safety Precautions For The Technician; Safety Precautions - Baumatic BT2355SS User Manual

Instructions for installation and
connection
Safety precautions for the
technician
Installation may be carried out in
accordance with the standing
regulations. It is extremely important to
ensure adequate air circulation.

Safety precautions

Connections must be carried out only
by the expert personnel, authorized by
the gas distribution company.
Provide regular air circulation in the room
where the appliance is located.
Gas arrangements are specified on the
sticker adjacent to the rating plate.
Before connecting the appliance check
that the local connection requirements
(gas pressure and type) match the
features of the appliance.
The appliance may not be connected to
the fumes exhaust device (for example to
the chimney). It must be located and
installed in accordance with the standing
installation and connection regulations.
Special attention should be devoted to
the ventilation requirements.
Distance between the cooktop and the
kitchen hood must be at least the
distance, indicated in the instructions for
use of the kitchen extraction hood.
The appliance is classified Class 2/1.
When positioned in a row it may be
located adjacent to a high kitchen
cabinet. Horizontal distance to high
cabinet or to the wall must be at least 300
mm.On the other side it is permitted to
have only the cabinet of equal height as
the appliance. Suspended cabinets may
be installed at such height as not to
impede the cooking process.
Instructions for use, installation and connection
Minimum vertical distance from the
appliance must be at least 650 mm.
In case the gas specifications do not
correspond to the requirements of the
appliance, call the service center or
the gas supplier. Qualified technician
will make necessary amendments to
agree with your type of gas.
Any other amendments or replacements
requiring tools, may be performed by
qualified personnel only.
In any case, you are allowed to replace
only such parts which do not require any
tools for their replacement!
Panels, glue and furniture lining from
artificial materials, adjacent to the
appliance must be temperature resistant
(>90°C), otherwise they might be
deformed.
Mains lead behind the cooker must be
placed in such manner to avoid touching
the back panel of the cooker because of
the heat it develops during operation.
Remove any packaging materials (foils,
artificial foam, nails, etc.) from the reach
of children, because they represent
potential danger. Children may swallow
small parts, or suffocate with foils.
27