Replacement of parts
The oven light bulb casing is under
tension. Danger of electric shock!
Before replacing the oven bulb switch off
the cooker and cut it from mains by
removing the mains power fuse or
disconnect the protective device.
Remember that the bulb is regarded as
consumption material and is not covered
by the warranty.
Other accessories
Oven grid, biscuit tray, etc. may be
ordered from the service center. When
ordering please quote the code and the
type or model of the appliance.
Hotplate control knobs are removed by
pulling them outwards and replaced by
pushing the new ones back in place.
Oven light bulb
The bulb for replacement should meet
the following specifications:
E 14, 230 V, 25 W, 300°C.
Unscrew the glass
cover by turning it counter clockwise, and
replace the bulb. Screw the glass cover
back in place.
Remember that the bulb is regarded
as consumption material and is not
covered by the warranty.
26
Instructions for use, installation and connection