Boot
In addition to POST, boot includes the following tasks after POST is complete:
•
Performs universal port configuration.
•
Initializes links.
•
Analyzes fabric. If any ports are connected to other switches, the switch participates in a fabric
configuration.
•
Obtains a domain ID and assigns port addresses.
•
Constructs unicast routing tables.
•
Enables normal port operation.
Supported HBAs and CNAs
NOTE:
Converged Network Adapters (CNAs) apply to the FCoE Converged Network Switch only.
For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the
latest version of the HP StorageWorks SAN design reference guide:
sandesignguide.
http://www.hp.com/go/
8-Gb SAN Switch hardware reference manual
91