Port Side Of The 8/40 San Switch; Nonport Side Of The 8/40 San Switch; Port Side View 8/40 San Switch - HP StorageWorks 8/40 - SAN Switch Hardware Reference Manual

• Integrates a single motherboard design with 667 MHz PowerPC 440EPx Reduced Instruction Set
Computer (RISC) CPU and integrated peripherals which provide high performance.
• Ships FICON, FICON Cascading and FICON Control Unit Port (CUP) ready.
• Provides two hot-swappable, redundant integrated power supply and fan FRUs.
• Universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports. Ex_Ports are activated
on a per-port basis with the optional HP B-series 48-80 Port SAN Switch Integrated Routing LTU.
This license provides native Fibre Channel Routing (FCR) on a per-port basis, rather than limiting
routing ports to those on a dedicated routing blade or switch. Just like traditional FCR, Integrated
Routing uses EX_Ports to import and export devices between fabrics, enabling selective device
sharing while maintaining remote fabric isolation. See
• Integrates a Universal Serial Bus (USB) port that provides storage for firmware updates, output of
the supportsave command and storage for configuration uploads and downloads.

Port side of the 8/40 SAN Switch

The port side of the 8/40 SAN Switch includes the system status LED, console port, Ethernet port and
LEDs, USB port, and FC ports with corresponding port status LEDs
Figure 2 shows the port side of the 8/40 SAN Switch.
1. System status (top) and power (bottom) LEDs
2. System RS-232 console port (RJ-45)
3. System Ethernet port
4. Ethernet port LEDs (green/amber)
Figure 2 Port side view 8/40 SAN Switch

Nonport side of the 8/40 SAN Switch

The nonport side includes the two redundant power supply fan assemblies and the corresponding
status LEDs. Figure 3 shows the nonport side of the 8/40 SAN Switch.
Table 6, page 29 for ordering information.
5. USB port
6. Fibre Channel port status LED
7. Fibre Channel port
8-Gb SAN Switch hardware reference manual 19