8/40 SAN Switch features
•
Provides the EZSwitchSetup Wizard for easy setup and basic configuration.
•
Support for 1, 2, 4, and 8Gbps autosensing Fibre Channel switch and router ports.
•
Integrates a single motherboard design with 667 MHz PowerPC 440EPx Reduced Instruction Set
Computer (RISC) CPU and integrated peripherals which provide high performance.
•
Ships FICON, FICON Cascading and FICON Control Unit Port (CUP) ready.
•
Provides two hot-swappable, redundant integrated power supply and fan FRUs.
•
Universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports. Ex_Ports are activated
on a per-port basis with the optional HP B-series 48-80 Port SAN Switch Integrated Routing LTU.
This license provides native Fibre Channel Routing (FCR) on a per-port basis, rather than limiting
routing ports to those on a dedicated routing blade or switch. Just like traditional FCR, Integrated
Routing uses EX_Ports to import and export devices between fabrics, enabling selective device
sharing while maintaining remote fabric isolation. See
•
Integrates a Universal Serial Bus (USB) port that provides storage for firmware updates, output of
the supportsave command and storage for configuration uploads and downloads.
Port side of the 8/40 SAN Switch
The port side of the 8/40 SAN Switch includes the system status LED, console port, Ethernet port and
LEDs, USB port, and FC ports with corresponding port status LEDs
Figure 2
shows the port side of the 8/40 SAN Switch.
2
5
3
1
1. System status (top) and power (bottom) LEDs
2. System RS-232 console port (RJ-45)
3. System Ethernet port
4. Ethernet port LEDs (green/amber)
Figure 2 Port side view—8/40 SAN Switch
16
Introducing the HP StorageWorks 8Gb SAN Switch
6 7
0
1
2
3
8
9
10
11
16
17
4
5
6
7
12
13
14
15
20
21
4
Table
18
19
24
25 26
27
32
33
34
35
22
23
28
29
30
31
36
37
38
39
8
9
10
11
12
13
14
15
26454a
5. USB port
6. Fibre Channel port status LED
7. Fibre Channel port
5, page 23 for ordering information.