Table of Contents
Advertisement
1 Quick Reference
J1 Analog Programming Connector
Voltage Monitor
Common (-S)
Current Monitor
Current Prog. Return
Voltage Prog. Return
Local / Analog State
Pin 1:
Enable +
Pin 2, 3:
Chassis Common
Pin 4–7:
Not Used
Pin 8:
Local/Analog
Pin 9:
Voltage Program
Pin 10:
Current Program
Pin 11:
Voltage Monitor
Pin 12:
Common
Pin 13:
CV/CC
Pin 14:
Enable –
Pin 15:
Shut Off
Pin 16:
Power Supply OK
Pin 17–20:
Not Used
Pin 21:
Local/Analog State
Pin 22:
Voltage Prog. Return
Pin 23:
Current Prog. Return
Pin 24:
Current Monitor
Pin 25:
Parallel
14
CV / CC
13
12
11
10
25
24
23
Parallel
The factory-shipped default configuration is Local operation, which
does not require connection to J1.
Connect Pin 1 to Pin 14 to enable the output. Disconnect to disable the output.
Signal return for Pin 15 and Pin 16. Connected to chassis.
No connection
Input for selecting between front panel or analog programming of the output.
Input for voltage or resistance programming of the output voltage.
Input for voltage or resistance programming of the output current.
Output for monitoring the output voltage.
Signal return for Pin 8, Pin11, Pin 13, and Pin 24. Connected internally to –S.
Output for constant voltage/constant current mode indication.
Connect Pin 14 to Pin 1 to enable the output. Disconnect to disable the output.
Input for Shut-Off control of the output. Referenced to Chassis Common.
Output to indicate the power supply status. Referenced to Chassis Common.
No connection
Output for indication of local or analog programming mode.
Signal return for Pin 9. Connected internally to –S.
Signal return for Pin 10. Connected internally to –S.
Output for monitoring the output current.
Output for current balancing in parallel operation.
Current Program
Voltage Program
Local / Analog
9
8
6
5
7
20
22
21
19
18
17
Chassis Common
Chassis Common
Enable +
4
3
2
1
16
15
14
Enable --
Shut Off
Power Supply OK
Series N5700 User's Guide
Hide quick links:
Advertisement
Table of Contents
