Agilent Technologies N5700 Series User Manual page 119

−100
−101
−102
−103
−104
−105
−108
−109
−110
−111
−112
−113
−114
−120
−121
−123
−124
−128
−130
−131
−134
−138
−140
Series N5700 User's Guide
Command Errors (these errors set Standard Event Status register bit #5)
Command error
Generic syntax error.
Invalid character
An invalid character was found in the command string.
Syntax error
Invalid syntax was found in the command string. Check for blank spaces.
Invalid separator
An invalid separator was found in the command string. Check for proper use of , ; :
Data type error
A different data type than the one allowed was found in the command string.
GET not allowed
A group execute trigger is not allowed in a command string.
Parameter not allowed
More parameters were received than were expected.
Missing parameter
Fewer parameters were received than were expected.
Command header error
An error was detected in the header.
Header separator error
A character that was not a valid header separator was found in the command string.
Program mnemonic too long
The header contains more than 12 characters.
Undefined header
A command was received that was not valid for this instrument.
Header suffix out of range
The value of the numeric suffix is not valid.
Numeric data error
Generic numeric data error.
Invalid character in number
An invalid character for the data type was found in the command string.
Exponent too large
The magnitude of the exponent was larger than 32000.
Too many digits
The mantissa of a numeric parameter contained more than 255 digits, excluding leading zeros.
Numeric data not allowed
A numeric parameter was received but a character string was expected.
Suffix error
Generic suffix error
Invalid suffix
A suffix was incorrectly specified for a numeric parameter.
Suffix too long
The suffix contains more than 12 characters.
Suffix not allowed
A suffix is not supported for this command.
Character data error
Generic character data error
Service Appendix C
119