Installation; Points To Note Before Installation - Brother S-7220D Instruction Manual

1

Installation

Points to note before installation

• Do not connect the power cord plug until installation is complete. The machine may operate if the
treadle is depressed by mistake, which could result in injury.
• Secure the table so that it will not move when tilting back the machine head. If the table moves, it
may crush your feet or cause other injuries.
• Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine head may cause your hand to slip, and your hand
may get caught.
• Machine installation should only be carried out by a qualified technician.
• Contact your Brother dealer or a qualified electrician for any electrical work that may need to be
done.
• The sewing machine weighs approximately 45 kg (99 lb). The installation should be carried out by
two or more people.The installation should be carried out by two or more people.
About the machine set-up location
• Do not set up this sewing machine near other equipment such as
televisions, radios or cordless telephones. Such equipment may
be affected by electronic interference from the sewing machine.
• The sewing machine should be plugged directly into an AC wall
outlet. Operation problems may result if extension cords are
used.
Carrying the machine
• The sewing machine should be carried by the arm and the motor
cover by two people as shown in the illustration.
• Hold the motor cover (A) by hand also so that the pulley does not
rotate.
• Do not hold the operation panel.
CAUTION
1