Installation - Brother HE-800C Instruction Manual

3. INSTALLATION

Machine installation should only be carried out by a
qualified technician.
Contact your Brother dealer or a qualified electrician
for any electrical work that may need to be done.
The sewing machine weighs approximately 56 kg.
The installation should be carried out by two or more
people.
Do not connect the power cord until installation is
complete, otherwise the machine may operate if the
treadle is depressed by mistake, which could result
in injury.
3-1. Table processing diagram
The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration
・
of the sewing machine.
Check that the control box is at least 10 mm away from the leg. If the control box and the leg are too close together,
・
it may result in incorrect sewing machine operation.
CAUTION
Use both hands to hold the machine head when
tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine
head may cause your hand to slip, and your hand
may get caught.
All cords should be secured at least 25 mm away
from any moving parts. Furthermore, do not
excessively bend the cords or secure them too firmly
with staples, otherwise there is the danger that fire or
electric shocks could occur.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems with
correct operation may also occur.
Install the safety covers to the machine head and
motor.
HE-800C
3. INSTALLATION
4938M
4