Using The Operation Panel (Advanced Operations); Sewing Pitch Setting Method - Brother S-7250A Instruction Manual

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
The operations described in this section should only be carried out by a technician.

4-1. Sewing pitch setting method

1
2
3
Memory switch No. 407 (MSW407 (Synchronized/not synchronized to pitch) has been added from software version 2.0.00.
When MSW407 is "ON", the backtack sewing pitches are synchronized with the main sewing pitch so that the pitch settings are
the same.
The main sewing pitch and the backtack sewing pitches can only be set separately when this is set to "OFF".
17
Press the key so that any one of the
Any
/
indicator
illuminates
・ The sewing pitch can be set regardless of whether the stitch no.,
speed, counter, locus or program is being displayed in the 4-digit
display.
(Refer to the Service Manual for details on programs.)
Press the -
Any
indicator
・ When the +
illuminates
0.05.
・ When the -
0.05.
NOTE:
The setting range is from 0.05 to 5.00.
The backtack sewing pitch can only be set when the
indicators are illuminated simultaneously.
(Refer to "4-3-2. Backtack sewing speed setting method".)
S-7250A
/ indicator illuminates.
/+ keys to change the setting value.
key is pressed, the setting value increases by
key is pressed, the setting value decreases by
/ /
1353D
1354D
/
1461D