Memory - Intel STL2 - Server Board Motherboard Quick Start Manual

Memory

Only PC133-compliant SDRAM is supported by the server board. Install from
64 MB to 4 GB of registered, ECC memory, using up to four single- or double-
banked DIMMs.
DIMMs must be installed in order from slot 1 to slot 4, no empty slots between
installed DIMMs. Slot 1 is the slot farthest from the processors.
Installed DIMMs must be the same speed and must all be registered. For a list
of supported memory, call your service representative or visit the Intel Support
website:
http://support.intel.com/support/motherboards/server/STL2/compat.htm
4 2
3 1
OM10673
Intel Server Board STL2 Quick Start Guide 17