Before You Begin - Intel STL2 - Server Board Motherboard Quick Start Manual

Before You Begin

Emissions Disclaimer
To ensure EMC compliance with your local regional rules and regulations, the final
configuration of your end system product may require additional EMC compliance testing.
For more information please contact your local Intel Representative.
®
See the Intel Server Board STL2 Product Guide for product Safety and EMC regulatory
compliance information. This is an FCC Class A device. Integration of it into a Class B
chassis does not result in a Class B device.
Safety Cautions
CAUTIONS
Pressing the power button does not turn off power to this board.
Disconnect the server board from its power source and from any
telecommunications links, networks, or modems before doing any of
the procedures described in this guide. Failure to do this can result in
personal injury or equipment damage. Some circuitry on the server
board may continue to operate even though front panel power button
is off.
Read and adhere to all warnings, cautions, and notices in this guide
and the documentation supplied with the chassis, power supply, and
accessory modules. If the instructions for the chassis and power
supply are inconsistent with these instructions or the instructions for
accessory modules, contact the supplier to find out how you can
ensure that your computer meets safety and regulatory requirements.
Electrostatic discharge (ESD) can damage server board components.
Do the described procedures only at an ESD workstation. If no such
station is available, you can provide some ESD protection by wearing
an antistatic wrist strap and attaching it to a metal part of the computer
chassis.
2 Intel Server Board STL2 Quick Start Guide