5.2.6.1 Port Forwarding
Port Forwarding allows you to re-direct a particular range of service port numbers
(from the Internet) to a particular LAN IP address. It helps you to host some
servers behind the router's NAT firewall.
Parameter
Port Forwarding
Protocol
Comment
Enable
Local IP Address
Local IP Port
Remote IP Address
Public Port
Interface
Current Port
Description
Check to enable or disable the port-forwarding feature.
This is the protocol type to be forwarded. You can
forward 'tCP" or "UDP" packets only, or you can select
"Both" to forward both 'tCP" and "UDP" packets.
Enter any comments for the setting.
Check this item to enable this entry.
IP address of your local server that will be accessed by
the Internet.
The destination port number that is made open for this
application on the LAN side.
The source IP address from which incoming traffic is
allowed. Leave blank for all.
The destination port number that is made open for this
application on the WAN side.
Select the WAN interface on which the port-forwarding
rule is to be applied.
To remove the port forwarding settings from the table,
61