The Blower Assembly Side Of The Chassis - HP StorageWorks 2/64 - Core Switch Reference Manual

The Blower Assembly Side of the Chassis

4
Figure 2 shows the blower assembly side of the HP StorageWorks Core
Switch 2/64 chassis, which provides access to the following components:
• WWN card and bezel - Provide LEDs for monitoring the switch and
storing WWN and IP address information.
• Blower assemblies - Three blower assemblies on the back of the chassis,
individually hot-swappable.
For operating information for the components, refer to
"Operating the Switch" on page 45.
getting started and general reference guide
Chapter 4,