HP StorageWorks 2/64 - Core Switch Reference Manual page 26

#10-32 Flat-Head
Screws (17x)
Front Mounting
Brackets (2x)
18
c. Remove the two front mounting brackets by removing the ten #10-32
flat-head screws on the left bracket and the seven #10-32 flat-head
screws on the right bracket (see
the left and right front mounting brackets and save the screws to
reattach the brackets later.
Figure 8. Removing the Left and Right Front Mounting Brackets
Figure 8). Note the difference between
getting started and general reference guide