HP StorageWorks 2/64 - Core Switch Reference Manual page 31

33 Holes Between
the Top Tinnerman
Nut and the Top
Rail Assembly
Screw
Rear of Rack
HP Rosebowl II
Rack
Installing the Switch
8. On the left and right rear rack columns, install a Tinnerman nut two holes
above the top screw of the rail assembly and another nut 34 holes above
the top screw (see
Tinnerman nuts. For a Compaq/Rittal rack, use #10-32 Tinnerman nuts.
Upper Pair
of M5 U-Type
Tinnerman Nuts
Lower Pair
of M5 U-Type
Tinnerman Nuts
Bottom of Rail Assemblies (2x)
(between 1/2 inch spaced holes)
Figure 13. Installing Tinnerman Nuts
Figure 13). For an HP Rosebowl II rack, use M5 U-type
#10-32
Tinnerman Nuts
Compaq/Rittal
Rack
23