HP StorageWorks 2/64 - Core Switch Reference Manual page 64

Table 5. 16-Port Card LED Patterns
Location of Purpose
LED of LED
Top LED Power
Second LED Status
!
Left of each Port
port, upper Speed
LED
56
Color of LED Status of Hardware
No light 16-port card does not have
(LED is off) incoming power.
Steady green 16-port card has incoming
power.
No light 16-port card is either
(LED is off) healthy or does not have
power.
Steady yellow 16-port card is faulty
Slow-flashing 16-port card is not seated
yellow: correctly, or is faulty.
on 2 second;
off 2 second
Fast-flashing Environmental range
yellow: exceeded.
on 1/2 second;
off 1/2 second
No light Port is either set to 1 Gbps
(LED is off) mode or does not have
incoming power.
Steady green Port is set to 2 Gbps.
Recommended Action
Ensure card is firmly seated
and has power.
No action required.
Verify Power LED is lit.
Ensure card is firmly seated
and check status with
slotShow
LED is still yellow, consult
HP support.
If light continues to flash,
pull card out and reseat. If
LED continues to flash,
replace card.
Check for out-of-bounds
environmental condition.
Verify Power LED is lit.
To change the mode, refer
to the hp StorageWorks
fabric os procedures guide.
No action required.
getting started and general reference guide
command. If