Leds On The Blower Assemblies - HP StorageWorks 2/64 - Core Switch Reference Manual

LEDs on the Blower Assemblies

Table 8. Blower Assembly LED Patterns
Location of Purpose
LED of LED
Left LED Power
Operating the Switch
Each blower assembly has two LEDs: a Power LED and a Fault LED.
The LEDs patterns may temporarily change during POST and other
Note
diagnostic tests.
Power
LED
Figure 23. Blower Assembly
Color of LED Status of Hardware
No light Blower assembly does not
(LED is off) have incoming power.
Steady green Blower assembly has
incoming power.
Fault
LED
Handle
Thumbscrew
(2x)
Recommended Action
Ensure blower assembly is
firmly seated and has
power.
No action required.
63