HP StorageWorks 2/64 - Core Switch Reference Manual page 27

Installing the Switch
5. The two rear mounting bracket sets consist of a rear-mount bracket and
a flange. Attach the two rear-mount brackets to the chassis by completing
the following steps:
a. Separate the flanges from rear-mount brackets by removing the four
#10-32 pan-head screws, two screws per set (see
screws to reinstall the flanges later.
Rear-Mount
Bracket
(1x set)
Flange (1x set)
Figure 9. Separating the Flange from the Rear-Mount Bracket
Figure 9). Save the
#10-32
Pan-Head
Screws (2x)
19