HP StorageWorks 2/64 - Core Switch Reference Manual page 30

Flange (2x)
22
7. From the front side of the rack, attach each flange to the rack with four
screws, two per flange. Install the bottom flange screw 30 holes above
the top rail assembly screw and then install the top flange screw two holes
above the bottom flange screw (see
rack, use 1/4-20 x .5" Phillips pan-head screws with integrated lock
washers. For a Compaq/Rittal rack, use 1/4-20 x .5" Phillips pan-head
screws with integrated lock washers with a .375" square mounting hole
between the screw and the rack column.
Figure 12. Attaching the Flange to the Rack
Figure 12). For an HP Rosebowl II
1/4-20 Phillips
Pan-Head
Screws (4x)
29 Holes Between
the Bottom Flange
Screw and the Top
Rail Assembly
Screw
Front of Rack
HP Rosebowl II Rack
getting started and general reference guide
1/4-20 Phillips
Pan-Head
Screws (4x)
.375" Square
Mounting Hole
Compaq/Rittal
Rack