Installing The Controller Cache Module - HP StorageWorks 1510i - Modular Smart Array Service Manual

6.
Verify that the top hook (1) and bottom clip (2) on the battery pack are securely attached to the
cache module.
7.
Repeat step 4
8.
Install the serviced cache module in the controller as instructed in
module.
NOTE:
The cache is disabled while the batteries are charging and is automatically re-enabled after the batteries
are fully charged.

Installing the controller cache module

1. Slide the cache module into the controller (1), until the side latches are fully engaged (2).
2.
Close the controller cover.
3.
Insert the serviced controller into the chassis as instructed in
newpage pi
1
2
through step 6 to install the second battery pack on the module.
1510i Modular Smart Array maintenance and service guide
15520
Installing the controller cache
Installing the controller.
51